| FACTORY INSTALLED OPTIONS PLACED WITH ORIGINAL ORDER The following options apply to both the Model 83 and 97 revolvers unless otherwise specified and only to new revolver orders. | |||
| |
|||
| 784-1501 |
.45 Colt cylinder fit to 454 Casull® Revolver |
$286.00 |
|
| 784-1504 |
.45 ACP cylinder fit to 454 Casull® Revolver |
$286.00 |
|
| 784-1512 |
50AE cylinder fit to .500 WE Revolver -NEW- |
$286.00 |
|
| 784-1512 |
480 Ruger cylinder fit to .475 Linebaugh |
$286.00 |
|
| 784-1503 |
.22 Rimfire Magnum cylinder fit to Model 83-22 LR |
$286.00 |
|
| 785-1504 |
.45 ACP cylinder fit to Model 97 .45 Colt |
$286.00 |
|
| 785-1509 |
9mm cylinder fit to Model 97 .357 Mag -NEW- |
$286.00 |
|
| 785-1507 |
38 Special cylinder fit to Model 97 .357 Mag |
$286.00 |
|
| 785-1508 |
.32-20 Winchester cylinder fit to Model 97 .32 H&R Mag. |
$286.00 |
|
| 785-1501 |
.22 Match chambers in place of Model
97 Sporting chambers |
$139.00 |
|
| 785-1502 |
.22 Match cylinder to fit to Model 97 .22 LR |
$425.00 |
|
| 785-1503 |
.22 Mag cylinder fit to Model 97 .22 LR |
$286.00 |
|
| 785-1505 |
.17 Mach 2 cylinder fit to Model 97 .17 HMR |
$286.00 |
|
| 784-1530 |
Flutes added to Model 83 cylinder |
$59.00 |
|
| 785-1530 |
Flutes added to Model 97 cylinder |
$59.00 |
|
![]() Cylinders are available for both Model 83 and 97 revolvers in certain calibers. |
|||
BARRELS |
||||
| 784-0807 | Octagonal Barrel Premier Grade Model 83 | $475.00 | ||
| 785-0807 | Octagonal Barrel Premier Grade Model 97 | $475.00 | ||
| 784-0807 | Octagonal Barrel 83-22 (REQUIRES ADDITIONAL PREMIER GRADE FINISH OPTION) | $475.00 | ||
| 784-0801 | Inverted Crown Centerfire Model 83 & 97 | $69.00 | ||
| 784-0806 | Shortened Barrel & Ejector Tube to 4"Centerfire Model 83 ( Note: This short barrel length requires the ejector tube to be removed in order to remove cylinder for cleaning due to physical lengths.) | $270.00 |
| 785-0804 | Shortened Barrel & Ejector Tube to 3½" Centerfire Model 97 ( Note: This short barrel length requires the ejector tube to be removed in order to remove cylinder for cleaning due to physical lengths.) | $270.00 |
| 784-0805 | Non-Standard Barrel Length Centerfire Model 83 4¾" Min., 12" Max. (10" max on Model 83-475L) Rim Fire Model 83 5 1/8" Min., 10" Max. Model 97 4¼" Min., 10" Max. |
$82.00 | |
| 784-0805 | Dovetail in Barrel for Replaceable Blued Fixed Front Sight -NEW- |
$14.40 |
| OTHER OPTIONS |
|||
| 784-3001 |
Honed action with trigger-pull set to min. of 3 lbs
(specify weight). Factory original is approximately 4 ¼lbs |
$97.00 |
|
| 784-3002 |
Trigger over travel screw - factory set |
$22.00 |
|
| 784-0201 |
Sling and swivel mounted to Freedom Arms Revolvers
(Model 83 only) |
$82.00 |
|
| 784-0203 | Barrel Stud Only. Model 83 only, Sling not included. | $44.00 | |
| 784-0202 | Grip Stud Only for Sling . Model 83 & 97, Sling not included. | $32.00 | |
![]() Sling and Swivel Studs |
|||
| 784-0804 |
MAG-NA-PORT, 4 ports, recommended for barrels 7½"
and over |
$152.00 |
|
| 784-0802 |
MAG-NA-PORT, 2 ports, recommended for barrels less
than 7½" |
$115.00 |
|
![]() MAG-NA-4-PORT |
|||
|
GRIP OPTION |
|||
| Ebony Micarta in place of standard grip | Premier Grade Model 83 & 97 | $38.00 |
|
| Field Grade Model 83 | $145.00 |
||
| Ebony Micarta in addition to standard grip | Premier Grade Model 83 & 97 | $175.00 |
|
| Field Grade Model 83 | $175.00 |
||
| (includes model 83-22) | |||
| Impregnated Hardwood in place of standard grip | Field Grade Model 83 | $110.00 |
|
| Impregnated Hardwood in addition to standard grip | Field Grade Model 83 (includes Model 83-22) |
$140.00 |
|
| Rounded Grip Butt and Grip Frame | Models 83 & 97 | $175.00 |
|
![]() 1 - Evergreen Grips - Standard on 22 Varmint 2 - Winewood Grips - Standard on Premier Grade 3 - Black Micarta Grips |
|||
OPTIONAL SIGHTS Factory Installed In Place of Standard Hunting Sights. For complete rear sight and front side blades see retrofit price sheet. |
|||
| Premier | Premier Grade Hunting Sight (screw adjustments, all steel construction) | Premier Grade |
Standard |
Field Grade |
$35.00 |
||
| Express | Express Sights (specify model 83 or 97) (shallow V-notch rear with brass bead front) | Premier Grade |
Same |
Field Grade |
$35.00 |
||
| Silhouette | Silhouette Competition Sights (Iron Sight Gun Works rear with adjustable front | M83 Premier Grade |
$37.00 |
Model 97 |
$54.00 |
||
Field Grade |
$72.00 |
||
| Millett | Millett Competition Sights (model 83 only) (Millet rear with specified from sight) | Premier Grade |
$23.00 |
Field Grade |
$58.00 |
||
| Fiber Optic | Front sight in place of standard ramp front sight | Premier Grade |
$11.00 |
Field Grade |
$11.00 |
||
![]() (from left to right) Field Grade, Premier Grade, Express Sight, Millett Competition, Silhouette Sight |
|||
REVOLVER ACCESSORIES |
|||||
| 994-6900E | Model 83 | LOVELL Scope Mount, one piece construction with 2 rings. Fits adjustable sight and no sight models ONLY | $135.00 |
||
| 995-6900E | Model 97 | ||||
| 994-6900B | Model 83 | SSK T'SOB Scope Mount Base with 3 rings. Fits adjustable sight models ONLY. | $144.00 |
||
| 995-6900B | Model 97 | ||||
| 994-6900A | Model 83 | The SSK T'SOB Scope Mount Base ONLY. Fits adjustable sight models ONLY. | $108.00 |
||
| 995-6900A | Model 97 | ||||
| 994-6900C | Model 83 | Leupold Scope Mount Base and Scope Rings SET. Fits adjustable sight models ONLY. | $66.00 |
||
| N/A | Model 97 | ||||
| 990-0100 | 2X Leupold Scope (Silver) | $437.00 |
|||
| 990-0101 | 4X Leupold Scope (Silver) | $437.00 |
|||
| 990-0112 | 2X - 6X Bushnell Variable Scope (Silver) | $370.00 |
|||
| 384-5000D | Pachmayr Rubber Grips (Model 83 only) | $30.00 |
|||
| 950-00 | Snap Caps (ea.) (Specify .32 .38 .41 .44 .45 .475 or .50AE caliber). | $3.00 |
|||
| Screw Kits | Includes part item numbers 3, 4 (3ea), 7, 13, 18, 52, 53, 70 Consult Instruction Manual | ||||
| 704-0101 | Screw kit, Model 83 Premier Grade | $14.75 |
|||
| 704-0102 | Screw kit, Model 83 Field Grade | $12.70 |
|||
| 705-0101 | Screw kit, Model 97 Premier Grade | $14.75 |
|||
| 994-6901B | TSOB Ring, each. | $15.90 |
|||
|
|||||
SERIAL NUMBER OPTIONS Price is per revolver and determined by number of revolvers on the same order to be shipped at same time. |
|||
| 784-0101 | Special Serial Number One to Five Guns (each) | $191.00 |
|
| Six or more guns (each) | $102.00 |
||
| 784-0102 | Sequential Serial Numbers (per gun) | $20.00 |
|
| Serial Number Search | $30.00 |
||
FINISH OPTIONS |
|||
| 784-0014 | Name or Initials on Back strap (Maximum of 26 spaces of 5/16" lettering) | $129.75 |
|
| 784-0013 | Polish and Jewel Hammer and Trigger | $99.50 |
|
| 784-0012 | Matte Finish on Premier Grade | $85.00 |
|
| 784-0015 | Premier Grade Finish on M83-22 LR | $344.00 |
|
![]() Polish and Jewel Hammer and Trigger |
|||
SIGHT DELETION OPTIONS Receiver drilled and tapped for scope base, no front sight base, front sight or rear sight. |
Subtract Amount Below from Price of Gun | ||
| 784-5701 | Model 83 Premier Grade | $134.00 |
|
| 784-5702 | Model 83 Field Grade | $99.00 |
|
| 785-5701 | Model 97 Premier Grade | $117.00 |
|
FRONT SIGHT BLADES For Adjustable Sight Freedom Arms Revolvers Only Contact Sales for assistance in determining the proper front sight height for specific barrel lengths. |
|||
| 514-65A | Blade Front Sight, standard on all Premier Grade and Field Grade Freedom Arms revolvers (7 heights available). | $21.00 |
|
| 704-65C | Express Brass Bead Front Sight (6 heights available) | $21.00 |
|
| 704-65C | Fiber Optic Front Sight (6 heights available) | $32.00 |
|
| 704-6500E | Silhouette Sight fully adjustable sight post for width & height (requires front sight hood) | $21.00 |
|
| 704-6598 | Sight Hood. (For use only with Adjustable front sight or Patridge sight blade. Not for use on calibers larger than .44 Magnum.) | $24.65 |
|
| 704-49 | Replaceable Blued Fixed Front Sight (3 heights available) Installation requires machining $13.95 | $37.30 |
|
COMPLETE REAR SIGHT ASSEMBLIES For Adjustable Sight Freedom Arms Revolvers Only. |
||
| 704-5700B | Model 83 Express Rear Sight Assembly, shallow V-notch (Requires brass bead front sight.) | $113.00 |
| 705-5700B | Model 97 Express Rear Sight Assembly, shallow V-notch (Requires brass bead front sight.) | $96.00 |
| 704-5700F | Model 83 Silhouette Competition Rear Sight Assembly. For .44 or smaller calibers. | $150.00 |
| 705-5700F | Model 97 Silhouette Competition Rear Sight Assembly. | $150.00 |
| 704-5700E | Millett Competition Rear Sight Assembly, for Model 83 revolvers only. | $136.00 |
| 704-5700C | Model 83 Field Grade Rear Sight Assembly. | $78.00 |
| 704-5700A | Model 83 Premier Grade Rear Sight Assembly. | $113.00 |
| 705-5700A | Model 97 Premier Grade Rear Sight Assembly. | $96.00 |
| FEDERAL LICENSE | All Dealers must have on file with Freedom Arms a copy of their current Federal Firearms License. This copy must have an original ink signature. Dealers must include a signed Sales Tax Exemption Certificate and business license. |
| PAYMENT TERMS | Freedom Arms accepts VISA, Master Card, American Express or Discover Card, which is not charged until we ship (except for a required order deposit). Freedom Arms will accept money orders, cashiers or certified checks for all C.O.D. orders. Payment of C.O.D. shipments by company check requires prior approval (other restrictions may apply). Freedom Arms will accept personal or business checks in prepayment of your order, but allow 10 business days for clearing. OPEN ACCOUNTS with terms of Net 30 days may be established on approved credit at Freedom Arms' discretion only after receipt of a signed credit application (supplied by Freedom Arms). A service charge will be assessed on delinquent accounts, which are temporarily assigned C.O.D. status when any invoice becomes past due. Customer agrees to pay all costs of collection, including interest and a reasonable attorney's fee. Volume and payment discounts are available, please call for details. |
| PURCHASE ORDERS | If the terms and conditions stated on your purchase order differ from our regular terms as stated on our invoice and you do not notify us of such within 15 days of invoice date, it shall signify your acceptance of our original terms as stated on the invoice. |
| SHIPPING | Orders are shipped F.O.B. Freedom, WY with a minimum charge of $5.00. UPS requires handguns to be shipped Next Day Air or Next Day Air Saver. All other items will be shipped UPS ground unless specified otherwise. Delivery dates cannot be guaranteed by Freedom Arms. |
| RETURNS | Returns or exchanges are accepted with PRIOR APPROVAL ONLY. No returns will be accepted without a valid Return Authorization Number (RAN). This number must appear on the return PACKING LABEL, and is only valid for 15 days from issue. Unauthorized returns will be sent back at YOUR expense. All returned items must be in resellable condition, have original packing material, manuals, and other accessories provided by Freedom Arms, and are subject to a minimum 15% restocking charge. Return transportation and insurance charges must be prepaid (C.O.D.s cannot be accepted). |